Azure Routing for EVE-NG

Azure Routing - Effective Routes

Reading Time: 4 minutes This time I write a small post about my Azure Routing for EVE-NG and how to get this working with my Azure Gateway to access nodes on the EVE-NG. In a previous post, I wrote about the IPSec tunnel from my home lab to Azure. To get access to the nodes on the EVE-NG VM … Read more

Azure Site to Site VPN with an Aruba Gateway

Aruba Gateway Site to Site VPN - Tunnel Status

Reading Time: 4 minutes As described in earlier posts I run EVE-NG in Azure. For several reasons, I need a direct connection to EVE-NG and the nodes within EVE-NG. I could use an Aruba Gateway in Azure but this would consume too much of my tight budget, so I decided to use an Azure Site to Site VPN with … Read more

Unmanaged SD-Branch Virtual Gateway in EVE-NG

Virtual Gateway - Download Device Identity

Reading Time: 3 minutes For some testing, I need some Aruba SD-Branch gateways. Instead of using hardware gateways, which I do not have, I use a virtual gateway. You could run them in ESXi as well, but why not use EVE-NG for this. For instructions on how to install EVE-NG use the following link: EVE-NG in Azure For other … Read more

Wired Guest Access with Aruba Wireless Gear

Create new Network - Security

Reading Time: 6 minutes This is maybe an uncommon scenario but I was asked to write something about this topic. Let’s assume you have Aruba Wireless Gear but your switching stuff is not from Aruba. In this post, I will show how to configure Aruba Controllers or Aruba IAPs to provide Guest Access to wired users as well. I … Read more

Aruba Downloadable User Roles

Downloadable User Role Flow Chart

Reading Time: 16 minutes This post is all about Aruba Downloadable User Roles and how to use them for wired and wireless access with dot1x and mac authentication. If you use Downloadable User Roles, you get a central point of configuration for all access-related configurations. ClearPass, which is used as the radius server, will have all the roles available. … Read more

Aruba Remote Mesh using an Aruba RAP

Aruba Remote Mesh - Topology

Reading Time: 8 minutes For an urgent project, I was asked to set up a Remote Mesh, and actually, I was thinking it is an easy task as I had created mesh networks before. But Remote Mesh is a different beast and it took me more than three days to get this working. To help others with this kind … Read more

Aruba Stuff in EVE-NG

EVE-NG - Device ID

Reading Time: 8 minutes I discovered that EVE-NG supports a lot of Aruba Stuff and in this post, I will show how to get it running in EVE-NG. I did a first post on this with the topic on how to install EVE-NG in Azure here: https://www.flomain.de/2020/11/eve-ng-in-azure/(opens in a new tab) This was related to EVE-NG in Azure, the … Read more

EVE-NG in Azure

EVE-NG in Azure - VM Settings

Reading Time: 6 minutes *******UPDATE September 19th 2022*******This guide does not work anymore as the script to install EVE-NG in azure is not available anymore. *******UPDATE END******* During the last months, I was regularly asked to build up a quick demo for partners and/or customers. As I cannot do this at home with limited hardware available I came across … Read more

Secure Client Bridge Connection

Secure Client Bridge Connection - Enable dot1x

Reading Time: 4 minutes How to connect a Client Bridge in a secure manner to the network not only means to secure the WLAN connection, but also the ethernet port of the bridge. This is the topic of the following post. The scenario for this post is to have the client bridge securely connected to the WLAN. But what … Read more

Aruba VIA VPN with IKEv2

Aruba VIA VPN - Successful VPN Connection

Reading Time: 12 minutes This post is to show how Aruba VIA VPN with IKEv2 works. With IKEv2 we switch to a certificate-based authentication which makes it easier for users and more secure for the whole organization. In an older post here I did a basic setup with IKEv1 and username password. This new post will leverage IKEv2 and … Read more

%d bloggers like this: